Industrial Oils

 

PetroGulf Hydraulic HVI

PetroGulf Hydraulic Oil (HVI) oils are high viscosity index (VI) multigrade hydraulic fluids. This allows a single grade of oil to be used in marine hydraulic systems which operate in different climate zones. A particular feature of these grades is the use of VI improvers with a very high resistance to shear. PetroGulf Hydraulic Oil (HVI) grades also contain highly effective corrosion inhibitor as demonstrated by the excellent result in the IP135B (steel in sea water) corrosion test.

API : HVI    SAE: 32, 37, 46, 68,100,150, 220, 320, 460

 
 

PetroGulf Hydraulic AW & ISO

PetroGulf Hydraulic Oils are high-quality hydraulic oils specially developed to satisfy the wide temperature variations and viscosity range encountered with modern hydraulic systems and meets the requirements of the world’s leading hydraulic equipments manufacturers.

API : AW & ISO   SAE: 10W, 32, 37, 46, 68,100,150, 220

 
 

PetroGulf Industrial Gear Oil

PetroGulf Industrial Gear & Bearing Oils are formulated using high viscosity index, solvent refined, based oils and incorporate a special sulphur-phosphorous additive to provide an extreme pressure performance which allow trouble free applications. These premium quality gear lubricants are for used in enclosed gear drives & speed reducers ranging from small boxes to large.

 SAE: 68, 100, 150, 220, 320, 460, 680, 1000, 1500

 
 

PetroGulf Compressor Oil

PetroGulf Compressor Oils are blended from high quality solvent refined high viscosity index base oils and fortified with special additives. PetroGulf Air Compressor Oils Are formulated to provide excellent oxidation resistance, rust and corrosion protection, and resistance to foaming. They have excellent oxidation resistance and thermal stability at high temperatures to minimize deposit formation and provide long service life. These oils protect against rust and corrosion.

SAE 32, 46, 68, 100

 
 

PetroGulf Turbine Oil

PetroGulf Turbine Oils are formulated with High Viscosity Index base oils and selected ashless additives to provide outstanding performance and protection in turbines. It has outstanding oxidation resistance and thermal stability at high temperatures to minimize deposit formation and provide long service life. It has high-load carrying capacity and excellent affinity for metal surfaces to protect against wear. These oils are recommended for steam, gas and hydraulic turbine systems.

SAE:32, 46, 68, 100, 150, 220

 
 
 

PetroGulf Therm Oil

PetroGulf Therm Oils are specialized products made from highly refined, high Viscosity Index, paraffinic base oils. They are non-toxic and exhibit excellent resistance to thermal cracking and oxidation. The high heat content and high thermal conductivity facilitates rapid heating and efficient operation of the heat transfer system.

SAE: 22, 32, 46, 68, 100, 150, 220

 
 

PetroGulf Cutting Oil

PetroGulf Cutting Oil is a premium general purpose emulsifying metalworking lubricant that provides excellent cooling and lubricity in a wide range of machining operations where heat dissipation is critical. It is formulated to provide high-quality base oil, select emulsifiers, and coupling agents to promote the formation of exceptionally stable, non-foaming, homogeneous emulsions in both soft and hard water.

SAE: Soluble, Neat

 
 

PetroGulf Flushing Oil

PetroGulf Flushing Oil Is blended from highly refined paraffinic base oils. This is recommended for flushing the lubricating system of gasoline and diesel engines. The flushing is carried out without load under hot, fast idle conditions for 15 minutes. The flushing is particularly recommended where the preceding oil service period may have been exceeded or the new oils oil change period is to be extended.

SAE: 32

 
 

PetroGulf Circulation Oil

PetroGulf Circulation Oils are uninhibited mineral oils that have been solvent refined from high quality paraffinic base oils. They are an economical choice for applications requiring un-additive oils of an API SA quality. PetroGulf Circulation Oils are light-colored multipurpose lubricating oils that may be suitable for use in machine tools, gear reducers, electric motors, sleeve bearings, air compressors, spindle bearings, roller and drive chains.

SAE: 22, 32, 46, 68, 100, 150, 220, 320, 460

 
 

PetroGulf Transformer Oil

PetroGulf Transformer Oils are highly-refined electrical insulating oil developed for use in oil-immersed transformers, capacitors, tap changers and circuit breakers where the equipment manufacturer specifies a Type II inhibited oil meeting ANSI/ASTM D3487-09 requirements. They have excellent low temperature properties and is noncorrosive to copper and copper alloys.

SAE: Inhibited, Unhibited

 
 

PetroGulf UTF

PetroGulf Universal Tractor Fluid is a premium hydraulic / transmission fluid that exceeds the refill and service top-up needs of farm and industrial tractor transmission, differentials, and immersed disc brakes. PetroGulf UTF is compounded with anti-wear, extreme pressure, anti-oxidant, and friction control additives and foam and corrosion inhibitors.

API : SE/CF   SAE: 10W30